Metal Filters & Strainers Parts Gallery | Yankee Wire Cloth Products

Basket Style Hydraulic Oil Strainer

Application: Off-road heavy equipment.
Material: Galvanized steel strainer is fabricated from 6 mesh wire cloth.
Dimensions: 9″ x 9″

Refueling Filter

Material: Stainless steel filter fabricated with 100 mesh inner screen and 6 mesh outer screen.
Construction: Seam overlaps are resistance welded. Rings and bevels are soldered.
Dimensions: 5-3/4” length; OD of large flange is 3-1/2”

Oil Pan Filter

Application: Off-road, heavy equipment
Construction: Crimped binding
Material: Copper flash coated size 10 wire mesh with galvanized binding.
Dimensions: 3″ x 6-1/2”

Corrosion Resistant Stainless Steel Filter

Application: Filters solids from liquids.
Construction: Stainless steel caps are spot resistance welded. This corrosion resistant stainless steel filter also has blanked holes on the end caps.
Material: Stainless steel 60 mesh.
Dimensions: 2-3/4” O.D. x 4-1/2”

Perforated Stainless Steel Filter

Application: This stainless steel filter serves as a reinforcement element for paper filters found in grease guns.
Construction: Stainless steel cap on bottom is resistance welded.
Material: Stainless Steel
Perforation Size: ¼” holes on 5/16 straight centers.
Dimensions: 7/8”O.D. x 2-1/4”

Vacuum Pump FIlter

Material: Stainless steel 30 mesh screen with 24 gauge stainless flange.
Construction: Resistance welded stainless flange.
Dimensions: 1” O.D. x 1-1/8”

Perforated Brass Filter

Application: Valve industry.
Construction: Rolled and with resistance welded seam overlap
Material: This perforated brass filter has a hole pattern of .020” on .066 “ straight centers.
Dimensions: 7/8” x 5/8″

30 Mesh Stainless Steel Filter

Application: Grease Gun
Material: This stainless steel filter is fabricated from 30 mesh stainless screen with 26 gauge stainless steel rings.
Construction: Stainless steel end caps are attached with epoxy. Lubrication filter/grease gun.
Dimensions: 5/8” O.D. x 7/8”

Tank Filter

Material: Outer screen is fabricated from 40 mesh, corrosion resistant stainless steel 40 mesh outer. Inner screen element is 8 mesh electric galvanized steel.
Construction: Binding element is crimped on this stainless steel tank filter. The bottom has a 5/8” blanked hole.
Dimensions: 1-5/8” O.D. x 1-1/2”

Pleated Stainless Steel Filter

Application: Gas Line Fuel Filter
Material: Outer screen is stainless steel 2 mesh; inner screen is 120 mesh stainless steel wire cloth.
Construction: This filter is constructed with plated steel end rings that are attached with epoxy, and contains pleated stainless steel inner filtration element. Screen seams are resistance welded.
Dimensions: 1-3/4” O.D. x 3-3/4”

Dutch Weave Stainless Steel Filter

Application: Fuel filter
Material: Dutch weave stainless steel 24 x 110 wire cloth
Construction: Threaded stainless steel ring is soldered; seam overlap is resistance welded.

Perforated Steel Motor Housing Guard

Application: General Industrial Use
Material: Perforated Carbon Steel
Secondary Operations: Powder coated finish, post-fabrication; blanked holes.
Dimensions: 6” O.D. x 11”
Other: Three holes are blanked out of a perforated steel rectangle before roll forming. Brackets are TIG welded to the housing to allow bolt-tightening of the finished guard.

Stainless Steel Filter Screen

Application: Carpet Cleaning Machine
Material: Filter uses stainless steel 16 mesh wire cloth. Attached cylinder is also 16 mesh stainless steel.
Construction: Outside edge of this filter is dipped in solder to retain shape.

Transmission Fluid Screen

Application: Off-Road Heavy Equipment
Material: This filter is constructed with an outer screen of 100 mesh stainless steel. Inner screen is 10 mesh galvanized. Bottom brace is cold rolled steel.
Construction: Cap is crimped. Tube has o-ring on the end. Tube is silver soldered in place.
Dimensions: 4” O.D. x 4 ¾”

Cryogenic Stainless Steel Filter

Application: Cryogenic
Material: Stainless steel wire cloth, 30 mesh. Bottom ring is 303 stainless steel.
Construction: Machined bottom ring is resistance welded.
Dimensions: 1-3/4” x 1”

Perforated Bag Fold Filter

Application: Air line filter
Material: Perforated steel inner core with an outer layer constructed from 80 mesh stainless steel and a brass pipe nipple.
Construction: Top end bag folded and resistance spot welded; brass fitting is soldered to the filter element.
Dimensions: 7/16” O.D. cylinder x 3”

Metal Filters/Metal strainers Parts Gallery

Basket Style Hydraulic Oil Strainer

Refueling Filter

Oil Pan Filter

Corrosion Resistant Stainless Steel Filter

Perforated Stainless Steel Filter

Vacuum Pump FIlter

Perforated Brass Filter

30 Mesh Stainless Steel Filter

Tank Filter

Pleated Stainless Steel Filter

Dutch Weave Stainless Steel Filter

Perforated Steel Motor Housing Guard

Stainless Steel Filter Screen

Transmission Fluid Screen

Cryogenic Stainless Steel Filter

Perforated Bag Fold Filter

We're Ready to Create Your Custom Metal Filter or Strainer