contact us

 

Call Toll Free:
1-877-263-3520
email webrfq@yankeewire.com

 

Choose From
The Following:

 

 

Metal Filters / Metal Strainers Parts Gallery

The parts shown on this page are manufactured to customer specifications, and are not available for sale as stock items. If your application requires a part similar to one shown below, send us a drawing, and we will contact you shortly.

Perforated Steel Motor
Housing Guard

Application: General Industrial Use
Material: Perforated Carbon Steel
Secondary Operations: Powder coated finish, post-fabrication; blanked holes.
Dimensions: 6” O.D. x 11”
Other: This perforated steel motor housing guard has a fabricated clamping lip to secure unit in place.

Basket Style Hydraulic Oil Strainer

Application:  Off road heavy equipment.
Material:  Galvanized steel strainer is fabricated from 6 mesh wire cloth
Dimensions:  9” x  9”

Aircraft In-Flight Refueling Filter

Material:  Stainless steel filter fabricated with 100 mesh inner screen and 6 mesh outer screen.
Dimensions:  5-3/4” length; OD of large flange is 3-1/2”;
Construction:  Seam overlaps are resistance welded.  Rings and bevels are soldered

Protective Insect Screen

Application:  This stainless steel screen is used to prevent insects from entering dwellings.
Material:  Screen is fabricated with 8 mesh stainless steel wire cloth
Construction:  Stainless steel binding is attached with spot resistance welding and crimped.
Dimensions:  5 -3/4 x 8-1/2”

Stainless Steel Filter

Application:  carpet cleaning machine
Material:  Filter uses stainless steel 16 mesh wire cloth.  Attached cylinder is also 16 mesh stainless steel.
Construction:  Outside edge of this filter is dipped in solder to retain shape.

Stainless Steel Screen

Material:  Screen is fabricated with 8 mesh stainless steel wire cloth
Construction:  Stainless steel U shaped binding is attached with spot resistance welding and crimped.
Dimensions:  6” O.D.   x 1-1/4”

Oil Pan Filter

Application:  Off-road, heavy equipment
Material:  Copper flash coated size 10 wire mesh with galvanized binding.
Construction:  Crimped binding
Dimensions:  3 x 6-1/2”

Transmission Fluid Screen

Application:  Automotive
Materials:  This filter is fabricated with an outer screen of 100 mesh stainless steel.   Inner screen is 10 mesh galvanized.  Bottom brace is cold rolled steel.
Construction:  Cap is crimped.  Tube has o-ring on the end.  Tube is silver soldered in place.
Dimensions:  4” O.D. x 4 ¾”

Corrosion Resistant Stainless Steel Filter

Application:  Filters solids from liquids.
Material:  Stainless steel 60 mesh.
Construction:  Stainless steel caps are spot resistance welded.  This corrosion resistant stainless steel filter also has blanked holes on the end caps.
2-3/4” O.D. x 4-1/2”

Perforated Stainless Steel Filter

Application:  This stainless steel filter serves as a reinforcement element for paper filters found in grease guns. 
Material:  Stainless Steel
Perforation Size:  ¼” holes on 5/16 straight centers.
Construction:  Stainless steel cap on bottom is resistance welded.
7/8”O.D.  x 2-1/4”

Cryogenic Stainless Steel Filter

Application:  Cryogenic
Material:  This corrosion resistant, stainless steel filter is fabricated from 30 mesh wire cloth.  Bottom ring is 303 stainless steel.
Construction:  Machined bottom ring is resistance welded.
Dimensions:  1-3/4” x 1”

Vacuum Pump Filter

Material:  Stainless steel 30 mesh screen with 24 gauge stainless flange.
Construction:  Resistance welded stainless flange.
Dimensions:  1” O.D. x 1-1/8”

Perforated Brass Filter

Application:  Valve Industry.
Material:  This perforated brass filter has a hole pattern of .020” on .066 “ straight centers.
Construction:  Rolled and with resistance welded seam overlap
Dimensions:  7/8” x 5/8"

30 Mesh Stainless Steel Filter

Application:  Grease Gun
Materials:  This stainless steel filter is fabricated from 30 mesh stainless screen with 26 gauge stainless steel rings.
Construction:  Stainless steel end caps are attached with epoxy.  Lubrication filter/grease gun.
Dimensions:  5/8” O.D. x  7/8”

Tank Filter

Material:  Outer screen is fabricated from 40 mesh, corrosion resistant stainless steel 40 mesh outer.  Inner screen element is 8 mesh electric galvanized steel.
Construction:  Binding element is crimped on this stainless steel tank filter.  The bottom has a 5/8” blanked hole.
Dimensions:  1-5/8” O.D. x 1-1/2”

Pleated Stainless Steel Filter

Application:  Gas Line Fuel Filter
Materials:  Outer screen is galvanized 4 mesh; inner screen is 120 mesh stainless steel wire cloth.
Construction:  This filter is constructed with plated steel end rings that are attached with epoxy, and contains a pleated, corrosion resistant stainless steel inner filtration element.  Screen seams are resistance welded.
1-3/4” O.D. x 3-3/4”

Perforated Bag Fold Filter

Application:  Air line filter
Material:  Perforated steel inner core with an outer layer constructed from 80 mesh stainless steel and a brass pipe nipple.
Construction:  Top end bag folded and resistance spot welded; brass fitting is soldered to the filter element. 
Dimensions:  7/16” O.D. cylinder x 3”

Dutch Weave Stainless Steel Filter

Application:  Fuel filter
Material:  Dutch weave stainless steel 24 x 110 wire cloth
Construction:  Threaded stainless steel ring is soldered; seam overlap is resistance welded.  Corrosion resistant stainless steel construction.

 

To Top